







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterGeneral Contractor vs Handyman in Doral, FL: Which One Can Legally Do the Work?
Choose a licensed general contractor the moment the job crosses $1,000 in combined labor and materials or touches roofing, structural framing, or impact glazing. In Doral, that line comes up faster than most homeowners expect. A handyman who installs an impact window without pulling a Miami-Dade permit doesn’t just risk a fine. The homeowner inherits an unverified NOA compliance gap that can surface later as a failed 40/50-year recertification and an uninsurable structure. Call (888) 300-3896 and we’ll tell you which side of that line your project sits on, free.
This isn’t a knock on handymen. A good one hangs a door, patches drywall, and resets a fence post for a fair price. The trouble starts when the task list drifts into permit territory, and in Miami-Dade County that drift happens in the same afternoon.

Why the $1,000 Rule Decides More Doral Jobs Than It Should
Florida law caps unlicensed contractor work at $1,000 combined labor and materials per project. That’s the ceiling for a handyman operating without a contractor’s license, and it’s a hard number, not a guideline. In most of the country that figure covers a lot of small work. In Doral it gets crossed by almost anything that involves the building envelope.
Think about what actually gets replaced on a 15-to-25-year-old tenant space or a gated-subdivision home here. A single impact window, rated for the High-Velocity Hurricane Zone, routinely runs past that $1,000 cap on the product alone. A roof repair that lifts a few courses of tile clears it. Structural framing for a doorway or a garage conversion clears it. When a task requires a Miami-Dade permit, the person pulling that permit must be a licensed Certified Building Contractor (CBC) or Certified General Contractor (CGC). A handyman cannot be the contractor of record, which means the permit, the inspection, and the final sign-off all go to somebody else, or to nobody.
The recertification trap waiting years down the road
Miami-Dade’s 40/50-year recertification process reviews permit history. When an inspector finds unpermitted work on a building going through recertification, the owner has to bring it into compliance at their own expense, out of pocket, often with engineering involved. That’s the part a handyman’s invoice never mentions. The savings today get paid back with interest at the recertification table, and by then the handyman is long gone.
HVHZ and NOA: The Paperwork a Handyman Can’t Sign
Every glazing, roofing, and structural product installed in Doral has to carry a Miami-Dade Notice of Acceptance, or NOA, confirming it’s rated for HVHZ wind loads. The licensed contractor of record submits those NOA numbers. It’s a role, not a formality. Without a licensed contractor in that seat, the NOA documentation that makes an installation compliant doesn’t get filed, and the installation is effectively unverified no matter how neat it looks.
We see the practical side of this on warehouse buildouts near Miami International Airport, where logistics tenants push for expedited timelines and the spec sheets catch out-of-state contractors who’ve never worked under HVHZ rules. The same approval discipline applies to a residential window replacement in a Doral subdivision. The product approval is the same product approval.

What Rowan’s Permit-Track Model Looks Like Day to Day
Our technicians have up to 19 years of experience, and they’re background-checked and uniformed. A live person answers our calls around the clock. Every visit produces a documented photo record as a standard deliverable, not an add-on. That record matters more here than in a lot of markets, because it’s the kind of paper trail that survives a recertification audit and answers the question an insurer will eventually ask.
Under Clause 1 of The Haven Standard, the price is written before anyone starts. That written price includes permit fees, so the comparison you’re making is total cost, not an hourly rate against a flat quote. No change proceeds without a signed change order, which is the discipline that’s kept our projects within a few percent of the agreed number across 4,000-plus jobs. Materials get named the same way: IKO or Atlas shingles on a roof, Boral trim on a facade, because a written scope with a brand in it is a scope you can check later.
- 365-Day Done Right Promise: if it isn’t done right, we make it right, backed by The Haven Standard rather than a handshake.
- Written price before any work starts, every trade, every time.
- Free second opinion on any written estimate: bring a competitor’s quote and we’ll review it line by line at no charge.
- Documented photo record on every visit: evidence of what we found and what we did.
Side by Side: Which Job Goes Where
| Work | Licensed general contractor | Handyman |
|---|---|---|
| Roof replacement or tile roof repair | Required: permit plus NOA filing | Not permitted under $1,000 cap |
| Impact window installation | Required: contractor of record submits NOA numbers | Cannot be contractor of record |
| Structural framing, garage conversion, additions, ADUs | Required: CBC or CGC pulls the permit | Out of scope by law |
| Paver or concrete driveway | Recommended where grading or drainage is involved | Fine for minor repairs under the cap |
| Fence installation, small repairs, paint touch-ups | When the scope grows past $1,000 | Reasonable fit under the cap |
Our own work runs from kitchen remodeling to bathroom remodeling to roofing, impact window installation, fence installation, driveway and pavers, and home additions including ADUs. The permit track runs through all seven. A home addition in Miami carries the same HVHZ product rules as a roof replacement in Hialeah or a window install in Homestead. Doral’s standing water and high water tables, left over from the area’s former wetlands, mean grading and drainage get scrutinized the same way glazing does.
Common Local Scenarios
A logistics tenant needs a buildout finished on an expedited schedule. The plans call for impact-rated storefront glazing. The wrong call is to hand that glazing to whoever’s fastest. The right call is a contractor of record who can file the NOA numbers and hold the timeline with documentation, not promises.
A homeowner wants a garage conversion in a mid-2000s gated subdivision. What looks like a framing and finishing job is a structural permit job from the first nail. The $30,000 to $80,000 range only makes sense when the permit and inspections are inside the written scope.
A landlord has a short list of punch items before a recertification inspection. This is where a documented photo record earns its keep. Every fix gets photographed and logged, so the inspector sees the work and the history behind it.
Comparison shopping across the region is fair game. Take a look at what a general contractor in Miami includes in a written scope, or how the Hialeah general contractor page handles permitting, and compare it against a storm damage repair guide for what to ask after a hurricane-season hit. If your project is a kitchen remodel in Miami or you’re weighing ADU construction anywhere in the county, the permit question is the first question, not the last.
FAQs
No. Impact window installation in Doral requires a licensed CBC or CGC as the contractor of record, because the installer must submit the Miami-Dade NOA numbers and pull the permit. A handyman cannot legally hold that role, so the installation would be unpermitted and unverified. Call (888) 300-3896 for a written window quote that includes the permit and the NOA filing.
Hour to hour, a handyman looks cheaper, but the real comparison only holds for work under the $1,000 cap and outside permit scope. Once a stop-work order or a recertification finding is in play, the handyman’s lower rate disappears in a single visit. Call (888) 300-3896 for a flat written price that includes permit fees, so you’re comparing total cost.
A general contractor’s written price covers labor, materials, permits, inspections, and the documentation trail, while a handyman’s day rate covers labor only. Representative project ranges in Doral run from $400 to $1,800 for roof repair, $8,000 to $25,000 for impact window installation, and $30,000 to $80,000 for a garage conversion. Call (888) 300-3896 for an exact quote on your scope, free.
Yes. Miami-Dade’s 40/50-year recertification reviews permit history, and unpermitted work found during that review has to be brought into compliance at the owner’s expense. That’s the cost that never shows up on a handyman’s invoice. Call (888) 300-3896 and we’ll review a competitor’s estimate line by line at no charge before you commit.
If you’d rather have it looked at, Rowan Construction Group Doral offers a no-pressure assessment in Doral. We’ll tell you honestly whether your job is a handyman list or a permit-track project, put the number in writing, and leave the decision with you. Call (888) 300-3896 for a free estimate.
Written by the team at Rowan Construction Group Doral, serving Doral, FL.


