







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Kitchen Remodeling in Doral: What to Know First
We provide independent Cambria kitchen remodeling in Doral, and a typical full kitchen runs $14,000 to $45,000 with a written, flat price before any work starts. Cambria is engineered quartz – a slab material, not a machine with parts – so the work here is fabrication, seam placement, edge profile, and pairing the slab with the right cabinets and substrate. Most full kitchen remodels take four to eight weeks once the slab is templated and the cabinets are in. This page is for Doral homeowners who’ve already chosen Cambria or are deciding between it and another quartz, and want real numbers before they call anyone. Reach us at (888) 300-3896.
How Cambria Products Go Wrong – and How We Fix Them

Cambria is a strong material, but it doesn’t fail the way a worn appliance fails. It fails at the fabrication and installation stage, and those failures show up months later. Here’s what we actually see on Cambria jobs across Doral.
- Seam separation on the sink and cooktop cutouts. Cambria’s tighter, denser slab takes heat and torque differently than granite, and a seam set over an unsupported dishwasher or sink opening will open within a season. The real cause is almost always missing or undersized subtop support, not the seam itself. We open the joint, add steel or plywood subtop, and re-set the seam with the correct color-matched adhesive.
- Edge chipping on undermount sink reveals. The softer edge profiles on Cambria’s matte-finish series chip at the inside of an undermount reveal when the fabricator polishes too aggressively. We dress the reveal, ease the edge to a small radius, and re-seal the exposed face.
- Hairline cracks radiating from a corner cutout. Cambria’s slab doesn’t love a sharp inside corner. On the Templeton and similar series, a 90-degree cutout corner is a stress riser. The fix is a radiused corner cut and a full subtop under the appliance – the kind of adjustment a fabricator who reads the install guide makes before the slab ever leaves the shop.
- Discoloration around the range. Cambria’s lighter finishes (Torquay, Fairbourne) hold up well to heat, but a pot set directly on the face near a gas burner will leave a scorch that doesn’t polish out. In Doral, we also see sun-driven fading on any Cambria face that catches direct west light through a slider for years. We specify a perimeter seal and advise on placement.
- Water intrusion at the backsplash joint. Doral’s humidity and steady afternoon rain push moisture through a poorly sealed counter-to-backsplash junction. The tell is a soft, dark line along the top edge. We remove the old bead, dry the substrate, and re-seal with a mold-resistant silicone rated for the application.
One genuine point of insight: Cambria’s own care guide tells you not to use abrasive cleaners, and most homeowners follow that. What the guide doesn’t say is that a Doral kitchen with a west-facing window will dull any polished Cambria face faster than the interior finishes will, simply from UV load. It’s a local reality that changes how we specify sealants and edge work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Cambria Kitchen Remodeling Process
- 1
Free on-site assessment. We measure the existing layout, check the substrate, look at the cabinet boxes and the plumbing and electrical rough-in, and confirm which Cambria series is actually installed. A written estimate follows.
- 2
Written price and signed scope before any work. Under Clause 1 of the Haven Standard, you get a flat written price and written scope before a single cabinet comes down. No estimate is verbal.
- 3
Slab templating and cabinet decision. We template the Cambria slab on site, and we decide together whether you’re keeping the existing cabinet boxes or going to new KraftMaid or Wellborn. That choice is the single biggest swing in the final number.
- 4
Fabrication and install. The slab is cut, edged, and finished to the specs we agreed on, then set with full subtop support at every cutout.
- 5
Test and clean-up. We check every seam, edge, and joint, water-test the sink and dishwasher, and clean up. You get a documented photo record of what we found and what we did, plus a written warranty.
Every crew member is background-checked and uniformed, and every visit includes that photo record as standard – not an add-on.
See the difference
Before
After
Before
After
Before
AfterWhat Cambria Kitchen Remodeling Costs in Doral

Doral Cambria work typically lands in these ranges. A full kitchen remodel runs $14,000 to $45,000. A small or partial kitchen remodel is $9,000 to $20,000. Cabinet installation alone is $4,000 to $13,000. Countertop installation (the Cambria slab itself) is $2,000 to $6,500. Backsplash installation is $800 to $2,500, and a kitchen island is $3,000 to $10,000.
| Scope | Doral Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small / partial kitchen | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Cambria countertop installation | $2,000 – $6,500 |
| Backsplash | $800 – $2,500 |
| Kitchen island | $3,000 – $10,000 |
What moves the price: slab size and edge profile, whether the cabinets are reused or replaced, plumbing and electrical relocation, and the condition of the subtop and substrate. Call (888) 300-3896 for a free estimate – the number you get is written, flat, and yours to compare against any other quote.
Why Doral Homeowners Call Rowan Construction Group Doral for Cambria Work
We’re an independent Cambria service provider, not affiliated with or authorized by Cambria, and we’re clear about that. What we do have is a documented record: 4,000-plus projects since 2007, every one quoted with a flat written price before work started and a photo record when the crew left. The 365-Day Done Right Promise means if something isn’t right, we make it right – printed terms, not a slogan. Our technicians have up to 19 years of experience, and we’re background-checked and uniformed. A live person answers calls 24/7, and we carry the same one-call relationship into KraftMaid, Kohler, GAF, and PGT work across Doral. If you’re comparing a Cambria quote, bring any written estimate and we’ll review it line by line at no charge.
FAQs

Yes. Cambria is engineered quartz, a non-porous surface that doesn’t absorb moisture the way natural stone can, so it handles Doral’s humidity well. The vulnerability isn’t the slab – it’s the seal at the backsplash and seam joints, which we account for in every install.
Cambria’s warranty protects against defects in the material itself when it’s fabricated and installed per its guidelines. A remodel doesn’t void it if the install follows those guidelines – which is why we template and support the slab correctly. As an independent installer we don’t speak for Cambria, but we build to the standard.
Usually, if the original series is still in production – Cambria keeps several lines running, and we can check availability against your slab’s markings. On a partial replacement, the bigger factor is matching the seam color and finish, which we do with color-matched adhesive.
Repair when the failure is a seam, an edge chip, or a joint seal – those are fixable and we do them often. Replace when the slab itself is cracked through a cutout or the finish is scorched or sun-faded beyond polish. A $2,000 to $6,500 reset is the honest number on a replacement.
A counters-only job is a few days; a full kitchen remodel runs four to eight weeks once slab and cabinets are ordered. The Cambria slab itself is the lead-time item. Call (888) 300-3896 for a dated schedule with your estimate – estimates are free.
Ready to price a Cambria kitchen in Doral? Call (888) 300-3896 for a free estimate. You’ll get a written, flat price and a written scope before any work starts, and the same flat price holds through the end of the job. Bring any other written quote and we’ll review it line by line at no charge.
Written by the team at Rowan Construction Group Doral, serving Doral and nearby areas.












