







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Cabinet Refacing Costs in Doral, FL - and Why the Substrate Swings the Price
Cabinet refacing in Doral runs $4,500-$11,000 for a typical 10×12 kitchen, and that range moves by roughly $1,800 depending on whether the substrate behind the new doors is moisture-resistant MDF or standard particleboard. Most quotes never name which one you’re getting. A full kitchen remodel here, if the boxes aren’t worth saving, falls in the $14,000-$45,000 band. Call (888) 300-3896 and we’ll put the number in writing before anyone touches a cabinet.
Doral’s housing stock sets up this page. The city grew fast after 2000, so a lot of the gated subdivisions and mid-rise condos now have kitchens 15 to 25 years old, built with the original builder-grade boxes. Twenty-five years of subtropical humidity takes a toll on that grade of particleboard. So the real question in Doral isn’t “how much does refacing cost” in the abstract. It’s whether the boxes in your kitchen are worth refacing at all.

What should you compare in a refacing quote? Three cost buckets, itemized
A refacing quote has three parts, and any contractor who hands you a single lump sum is hiding two of them. We break ours out in writing, in dollars, so you can line it against any other quote.
| Line item | Typical Doral range | What drives the number |
|---|---|---|
| Door and drawer fronts | $180-$520 per door | Species and door style - a painted MDF shaker sits at the low end, a stained hardwood raised-panel at the high end |
| Veneer wrap on exposed box faces | $40-$95 per linear foot | Real wood veneer vs. PVC foil, and how many box faces actually show |
| New hardware (hinges, pulls, soft-close) | $12-$45 per hinge or pull, installed | Brand and whether you keep the existing hinge boring |
| Moisture-resistant substrate upgrade | +$18-$35 per linear foot | MR-MDF or PVC-foil face vs. standard particleboard |
| Full cabinet installation (if boxes are replaced) | $4,000-$13,000 | Box count, layout changes, and whether the countertop comes off |
| Countertop replacement (if refacing disturbs it) | $2,000-$6,500 | Material - Cambria and Caesarstone quartz at the top of the range |
Read those rows together and you can cross-check any quote you get. If a contractor quotes $6,000 flat and can’t tell you which substrate is going on, the missing $1,800 is probably coming out of the spec, not the price.
Why particleboard fails in South Florida - and what the upgrade costs
Standard particleboard swells when it takes on moisture. In a Doral kitchen, the moisture comes from three directions: the ambient humidity, condensation on cold cabinet faces during the summer air-conditioning cycle, and the occasional slow leak under the sink that nobody sees for a month. Once the board swells, it doesn’t shrink back. You get delamination at the edges, a soft spot around a hinge screw, and doors that stop hanging square - usually within three to five years of the first exposure.
Moisture-resistant MDF handles the humidity cycle far better because of how the fibers are bound. PVC-foil facing takes it a step further: the foil is a sealed skin, so a spill runs off instead of wicking in. KraftMaid and Wellborn both make cabinet lines built on these substrates, and we quote them by name so the number has a spec attached. The upgrade is real money - $18 to $35 per linear foot - and it’s the difference between a refacing job that lasts 15 years in this climate and one that starts peeling in the fifth summer.
The decision rule: reface or replace?
Before we quote a refacing job in Doral, we run two checks on the existing boxes. Both take about ten minutes and both are free.
- The squareness test. We check the box for square with a framing square at the face frame. If a box is out of square by more than about 1/8 inch, the new doors won’t sit flush no matter how good the hinge is. That box needs replacing, not refacing.
- The delamination check. We press a screwdriver tip into the bottom panel and the shelf edges. If the material crumbles or feels spongy, water has already been in there. Refacing over rotted substrate is money thrown at a failure.
If two or three boxes fail, the math usually favors replacement. If the boxes are solid and only the doors and hardware are tired, refacing wins on cost every time. That’s the honest fork in the road, and we’ll tell you which side of it your kitchen is on. For the deeper side of that work, our Kitchen Remodeling page covers full gut layouts - and if the whole room is being reconsidered rather than just the faces, Kitchen Remodeling in Doral walks through how the local scope changes.

What happens when a rotted box turns up mid-project?
It happens often in Doral, and it’s the single biggest complaint homeowners raise about refacing: the project starts, a crew pulls a door, and the box behind it is soft. The bill goes up and nobody agreed to it. Under Clause 1 of The Haven Standard, no work proceeds on a change until the change order is signed. If we find a rotted box, you get a written change order with a price on it, and you decide whether to proceed. No silent inflation. That discipline is why our projects have finished within a few percent of the number agreed at the start, across thousands of jobs.
The same standard covers the finish. The 365-Day Done Right Promise means if a veneer edge lifts or a hinge fails within the first year, we come back and fix it at no charge. That’s printed in writing, not promised at the close.
How does Doral’s climate and building code affect cabinet work?
South Florida’s UV load and humidity are the obvious factors, but Doral adds a layer most refacing contractors don’t mention: the city’s construction climate skews commercial and industrial, with a dense run of warehouses and distribution parks near Miami International Airport and the Dolphin Expressway. That means the trades here are tuned for buildouts and tenant improvements, and the crews who quote residential kitchen work are a smaller pool than you’d expect for a city this size. It also means the material supply chain here is deep on commercial-grade product and thin on cabinet-grade finishes.
Because Doral sits inside Miami-Dade County’s High-Velocity Hurricane Zone, anything that touches the building envelope needs a Miami-Dade Notice of Acceptance (NOA) product approval. Refacing is interior work and doesn’t need an NOA, but if your kitchen remodel expands into a window, a door, or an addition, the product spec changes overnight. It’s worth knowing before you sign, so the scope doesn’t quietly get more complicated.
FAQs
Cabinet refacing in Doral costs $4,500-$11,000 for a typical 10×12 kitchen, with moisture-resistant substrate adding roughly $18-$35 per linear foot over standard particleboard. Door and drawer fronts run $180-$520 each depending on species and style, veneer wrap runs $40-$95 per linear foot, and new hardware runs $12-$45 per piece installed. Call (888) 300-3896 for a written quote - estimates are free.
Refacing is cheaper when the boxes are sound: it typically runs $4,500-$11,000 versus $4,000-$13,000 for a full cabinet installation before countertops. If two or more boxes fail the squareness or delamination check, replacement usually wins on total cost over 15 years. We’ll run both checks and tell you which path is cheaper for your specific kitchen. Call (888) 300-3896 and we’ll lay out both numbers in writing.
No - a standard Doral refacing job takes two to four days, depending on cabinet count and whether the substrate needs upgrading. Doors and drawer fronts are cut and finished ahead of time, so the on-site disruption is shorter than a gut remodel. We give you a written start and finish date before work begins. Call (888) 300-3896 to schedule the site check.
We come back and fix it at no charge within 365 days of completion, under the 365-Day Done Right Promise. The guarantee is printed in writing and backed by The Haven Standard, not a verbal promise at the close. If a veneer edge lifts, a drawer front comes loose, or a soft-close hinge fails in the first year, that’s on us. Call (888) 300-3896 and we’ll schedule the return visit.
Get the Number in Writing Before Anything Else
If you’re holding a refacing quote that doesn’t name the substrate, the veneer spec, or the hardware brand, let us review it. We offer a free second opinion on any written estimate, line by line. Call (888) 300-3896 to schedule your site check, or start with the home page to see the other trades we handle under the same flat written price. Uniformed, background-checked technicians. A photo record included on every visit. A number in writing before work starts.
Written by the team at Rowan Construction Group Doral, serving Doral, FL.
What Our Customers Say
"Driveway replaced properly with a base that will actually last. They explained why the cheaper quote was cheaper."
- Reggie O."Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F."They found an old septic line under the driveway run and stopped, documented it, and re-quoted before continuing."
- Xavier L.












