Last updated November 18, 2026








Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Windows & Doors Maintenance Schedule: What to Do and When
PGT and CGI are two of the most commonly installed impact window brands in Miami-Dade County, and both require documented annual hardware lubrication to keep their limited warranty valid. Most homeowners never read that clause. The lubricant you choose matters too: petroleum-based products degrade the weatherstripping gaskets these windows depend on, and a service record showing the wrong product can work against a claim. A full impact window and door package on a Doral home runs $15,000 to $40,000, so the maintenance calendar in this guide is worth more than the paper it’s printed on. Here is what to do monthly, quarterly, annually, and every five years, plus how to document it so a manufacturer or adjuster accepts it.
Quick Answer
Impact windows and doors in Florida need quarterly inspections (weep holes, tracks, sealant lines), annual hardware lubrication with a silicone-based product and a weatherstrip check, and full perimeter sealant replacement every five years. Document every task with date-stamped photos and product receipts, because both PGT and CGI warranty terms condition coverage on documented maintenance. Storm season prep adds specific checks that routine maintenance does not cover.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Table of Contents
- Why an Impact Window Needs a Schedule at All
- Quarterly Tasks: Weep Holes, Tracks, and Sealant Checks
- Annual Tasks: Lubrication, Weatherstrip, and Door Fasteners
- Every Five Years: Sealant Replacement and Glass Inspections
- Storm Season Preparation: What’s Different From Routine Care
- How to Document Maintenance for a Warranty Claim
- Common Mistakes to Avoid
- Frequently Asked Questions
Why an Impact Window Needs a Schedule at All
An impact window is a system, not a pane of glass. The laminated glazing resists a wind-borne missile, but the frame, the weatherstripping, the weep holes, and the perimeter sealant are what keep water out during a 100-mph rain event. Those four components degrade on a predictable clock, and in Doral the clock runs faster than almost anywhere else in the country.
Doral sits on drained wetland with a high water table and near-constant humidity. Summer afternoon storms roll in off the Everglades with rain driven almost horizontal, and the salt-laden air from the coast reaches inland far enough to accelerate corrosion on aluminum hardware and hinges. Add the UV load from roughly 250 sunny days a year and you have a climate that eats sealant joints years before a homeowner in a temperate city would think about them.
Manufacturer warranties reflect this. PGT and CGI both tie limited coverage to proper maintenance, and both specify the products to use. Skip the annual lubrication and you haven’t just shortened the hardware’s life. You’ve potentially given the manufacturer a documented reason to deny a claim on a window that cost you north of $1,000 installed.
We’ve seen this in Doral homes built during the 2015-to-2022 development boom around Downtown Doral and the 87th Avenue corridor: the windows are generally still under their labor warranty, but the sealant at the frame perimeter has already started to check and crack because nobody looked at it. If you’re mapping out a full exterior maintenance plan for your home, it’s useful to think of the Rowan Construction Group Doral home as a single system – roof, windows, doors, and drainage all fail at connected seams.
Quarterly Tasks: Weep Holes, Tracks, and Sealant Checks
Four times a year, set aside about an hour. Depending on window count, it may run longer. These tasks take ordinary household tools, and you can do them yourself.
- Inspect and clear weep holes. Every impact window frame has small drainage slots at the sill. If they’re blocked by dirt, pollen, or insect nests, water backs up inside the frame and eventually finds the interior wall. Push a stiff wire or a pipe cleaner through each slot, flush with a garden hose from outside, and confirm water drains freely.
- Clear the sliding tracks. Sliding windows and patio doors collect grit that abrades the rollers and eventually prevents a tight seal. Vacuum the track, then wipe with a damp cloth. Do not spray silicone lubricant into the track itself; it attracts dust. Clean only.
- Walk the sealant line at the frame perimeter. Run your hand and a flashlight along the interior and exterior joint where the frame meets the wall. Look for cracking, shrinkage, or gaps where the bead has pulled away. Note any location with a gap and address it before the next rainy season.
- Check door thresholds and sweeps. Exterior door sweeps wear from foot traffic and stop sealing long before they visibly fall apart. Slide a piece of paper under the door from the outside; if it slides out easily, the sweep or the threshold gasket needs replacement.
In Doral, the rainy season runs roughly from June through October, and it dumps most of its water in short, intense bursts. That means a clogged weep hole won’t fail slowly. It will fail during the first serious afternoon storm and stain your drywall from the inside out. We routinely find blocked weep holes on second-story windows in Doral homes where the homeowners can see the windows clearly but have never once looked at the sills.
Annual Tasks: Lubrication, Weatherstrip, and Door Fasteners
Once a year, do these tasks. If your windows are PGT or CGI, this is the annual inspection your warranty documentation refers to, so keep records.
- Lubricate hardware with a silicone-based product. Apply a silicone spray to hinges, locks, latch mechanisms, and any operating hardware. Use a product labeled silicone, dry-film, or PTFE. Do not use petroleum-based lubricants, and specifically avoid general-purpose products like WD-40. Petroleum degrades the weatherstripping gaskets and the plastic bushings inside the hardware. A silicone-based product such as a silicone spray from brands like 3-in-One or a dedicated dry-film, available at any Doral hardware store, is the correct choice.
- Inspect weatherstripping and define a replacement threshold. Check the felt or foam strip around each operable window and door. If it’s compressed flat, torn, or leaves a visible gap when the window is latched, replace it. A useful threshold: if you can see daylight or feel a draft along any part of the seal, that length of weatherstrip has failed.
- Check door fasteners on exterior doors. Hinges and strike plates loosen over time under repeated slam cycles. Tighten them. If a screw won’t hold, replace it with a longer screw rather than a larger one; this gives it fresh wood to grip.
Doral’s summer heat also makes rubber and foam weatherstripping dry out and crack faster than in cooler regions. The same UV and humidity that stress the sealant also stress gaskets and glazing seals. If your exterior system includes doors that take direct western sun (common on homes flanking the Doral Boulevard corridor, where afternoon exposure is intense), check them first each year.
If your home’s exterior work is part of a larger project, such as a kitchen finished with Silestone or Caesarstone countertops where new window or door installation is planned, the maintenance calendar should start at the moment of install. For more on those interiors, see our Home Additions & ADU in Doral page, which covers how new window and door schedules integrate into a larger build.
Every Five Years: Sealant Replacement and Glass Inspections
Every five years, budget for targeted maintenance that goes beyond inspection. You can do the visual inspection yourself, but we recommend a professional do the actual sealant replacement, because getting the joint preparation and product compatibility right matters.
- Replace the full perimeter sealant with a compatible product. Remove the old sealant and apply a fresh bead of an exterior-grade silicone or polyurethane sealant compatible with the frame material and the wall finish. The wrong product will fail in a year in Doral’s climate. This is the most commonly skipped task on the entire schedule, and it’s the one most likely to cause interior water damage.
- Assess the threshold gasket on exterior doors. If the threshold gasket has hardened or compressed flat, replace it. A warped or worn threshold lets water in at floor level, which shows up as cupped flooring or a stained baseboard inside.
- Inspect insulated glass units (IGUs) for seal failure. An IGU is the double-pane assembly. Look for fogging, a milky film, or condensation between panes that won’t clear on its own. In Doral’s humidity, failed IGU seals are common on west-facing windows that take the most thermal cycling. A failed seal compromises the insulating value and, on some impact products, the certification. Report it to the manufacturer before the warranty period expires.
On a window installed in 2018, a five-year checkpoint in 2023 is exactly when we expect to see the first sealant joints beginning to fail. If your home is past that mark, this is the year to schedule it.
Storm Season Preparation: What’s Different From Routine Care
Storm prep is not routine maintenance. It’s a separate checklist to run once, before June 1, to make sure your windows and doors will function under load, not just under normal conditions.
- Test every operable window’s lock and latch. An impact window resists pressure only if it’s fully latched. Confirm the lock engages and that the window seats completely when latched.
- Confirm exterior door hardware operates under pressure. Open and close each exterior door, then push against it from outside while latched. If there’s any movement beyond minor deflection, the strike or the lock may not hold. Address it before the first named storm.
- Clear all drainage paths, not just weep holes. Check that nothing blocks the sill drainage on the exterior face, including landscaping that’s grown over the sill line.
- Photograph the entire exterior window and door perimeter before storm season. This is your baseline record should a claim be needed after a storm.
This season-specific checklist is a good time to think about the rest of the exterior. The same wind and rain that test your windows also test your perimeter fencing. Our Fence Installation in Doral page covers how to separate a fence that needs post maintenance from one that failed structurally.
How to Document Maintenance for a Warranty Claim
An adjuster or manufacturer representative is not asking how much you care. They are asking what you did, when you did it, and what product you used. Documentation should answer those three questions directly, and it should be assembled as you go, not after a claim.
Build a maintenance file for each window and door that includes:
- A dated photo log. Photograph the weep holes, the sealant lines, and the hardware on the day you finish the task. Include the date in the frame or described in a caption. A photo of a clean weep hole with a date stamp is a record; a verbal statement that you clean them is not.
- Product receipts. Keep the receipt for every silicone spray, sealant tube, and weatherstrip replacement. The product specified on the receipt is often what a manufacturer reviews when they evaluate whether you used a compatible lubricant. A silicone-based product receipt is the defense against an assertion that petroleum-based product was used.
- Date-stamped notes. A short log of what was checked and what was found. “August 12, cleared weeds on west-facing windows, sealant at living room window frame showed hairline crack, scheduled reseal.” Those notes show you responded to conditions, which is exactly the maintenance standard a warranty expects.
If you hire a contractor for any of these tasks, the contractor’s service record can serve as documentation, but ask them to produce it in writing. Our Driveway & Pavers in Doral page describes how our process handles documentation on exterior work; window and door records follow the same pattern.
Common Mistakes to Avoid
- Lubricating with WD-40 or another petroleum product. It works as a temporary fix and degrades the gaskets over time. On PGT and CGI products, it’s the fastest path to a warranty argument. Use silicone.
- Sealing over a failed joint without removing the old sealant. A fresh bead over a contaminated, unbonded joint will fail within months. Doral’s humidity will find the gap.
- Skipping the annual task because “nothing looked wrong.” Hardware lubrication and weatherstrip inspection are preventive. The window doesn’t fail on a schedule you can see; it fails after several seasons of small neglect.
- Cleaning sliding tracks with a spray lubricant. Silicone in the track attracts fine dust that mixes with pollen and grinds into the rollers. Clean the track dry, then wipe it.
- Waiting for a weather event to test the doors. Test locks, latches, and sweeps in the off-season, not the day before a storm. Our fencing and exterior work advice applies the same principle: test before the load arrives.
- Discarding product receipts. A discarded receipt is a discarded defense if a warranty claim is ever made. Keep them with the window’s documentation.
- Assuming the installation warranty covers weathering. Installation warranties typically cover workmanship, not the sealant decay from weather. Read your own warranty terms and know what’s your maintenance responsibility.
See the difference
Before
After
Before
After
Before
AfterWhen to Call a Professional

Call a professional for full perimeter sealant replacement if the joint has failed over a significant length, for an IGU that shows fogging between panes, for any hardware that won’t latch or hold under pressure, or for a door threshold that has shifted beyond simple gasket replacement. You should also call if you suspect that weatherstrip damage or sealant failure is already letting water into the wall assembly; that’s a diagnostic problem, not a maintenance task. If your home has a newer window package installed as part of a larger project, the same professional relationship that installed the windows should handle warranty reports before the period expires. Rowan Construction Group Doral offers free estimates in Doral on window, door, and exterior work, including the full scope of our Home Additions & ADU in Doral service. Call (888) 300-3896 to schedule your free estimate.
Frequently Asked Questions
A silicone-based product, often sold as silicone spray or dry-film lubricant. Petroleum-based products, including general-purpose products like WD-40, degrade the gaskets and bushings, and may be a factor in a warranty review. Apply annually and keep the receipt.
Quarterly is the right interval in Doral. Weep holes clog with pollen, dirt, and insect material, and the rainy season dumps substantial water in short bursts. A blocked weep hole will back up and stain interior wall surfaces. If your home is under heavy tree cover or near a lot of landscape debris, inspect more often.
Look for fogging, a milky film, or permanent condensation between the panes. If the haze doesn’t clear on its own, the seal has failed. Report it to the manufacturer while the warranty period is active, and don’t assume it’s a cosmetic issue. A failed seal compromises insulation and can affect the window’s certified performance.
It depends on the warranty, but most major impact window manufacturers, including PGT and CGI, condition limited coverage on documented maintenance. Read your specific terms. Documenting your annual tasks is the strongest way to keep the claim intact.
Five years is the target in South Florida, not a strict rule. In Doral’s climate, sealant joints commonly begin to fail around the five-year mark, so it’s a practical schedule. Inspect more often on west-facing windows and on any window that takes direct sun. If you see cracking or shrinkage, replace sooner.
Test every operable window and door: lock, latch, and seat fully. Push against each latched exterior door from the outside. Confirm exterior drainage is clear and landscaping isn’t blocking the sill. Photograph each window and door perimeter as a record. Call (888) 300-3896 if you find a hardware problem you can’t resolve; estimates are free.
The Bottom Line
Impact windows and doors need a real maintenance schedule in Doral: quarterly weep hole and track inspection, annual hardware lubrication with a silicone-based product, and full perimeter sealant replacement every five years. The tasks take a few hours a year. Skipping them risks a warranty claim and a water-damaged wall. Document what you do, keep your receipts, and photograph as you go. If you want a professional to handle any part of the schedule, Rowan Construction Group Doral offers free estimates and a documented record on every visit. Call (888) 300-3896 to schedule yours.
Written by the team at Rowan Construction Group Doral.


